Turn your pedal bike into an e-bike in just 30 seconds with this $309 universal attachment

LIVALL PikaBoost transforms your regular pedal-powered bike into an electric bike that gives you the benefit of a motor-driven riding experience, all in a 30-second tool-free setup. Designed to fit snugly in the mount of your bike frame, LIVALL PikaBoost sits just above your rear wheel and monitors your speed, cadence, terrain, etc. push when needed!

Designer: LIVALL

Click Here to Buy Now: $309 $599 ($290 off). Hurry, less than 72 hours left! It went over $1,160,000.

While e-bikes are all the rage these days, buying a new bike can set you back thousands of dollars, or converting your existing bike to an e-bike can take time, effort, money, and take your bike apart. add the conversion kit. PikaBoost, on the other hand, is easy for a child to mount, attach to your bike without any tools, and works on almost any bike, from regular road bikes to mountain bikes and even newly released folding bikes. . The way it works is simple – just like how you move the pedals forward to move the bike, PikaBoost uses a motor to propel your bike forward. PikaBoost’s engine transfers its spins to a rubber wheel that rests on the rear wheel of your bike, giving it a weirdly hybrid ‘rear drive’!

From the fact that it’s a portable device that puts bikes on and off on demand, to its real capabilities that go beyond ‘helping’ your ride, there’s a lot of things that are pretty remarkable about PikaBoost. PikaBoost uses what LIVALL likes to call AAR technology (Automatic Adaptive Speed), or a combination of sensors and algorithms that make your driving smarter by adjusting its power to the terrain or how tired you are. increase where necessary. Meanwhile, it recovers that power through an intelligent regenerative system that converts your pedaling into battery power for later use.

Semi-assisted pedaling.

Fully assisted without pedaling.

Once fixed in place, PikaBoost offers three broad modes of use, depending on the degree of assistance it provides. Perfect for short distances, Cruise mode allows PikaBoost to handle most of the load during urban commutes like commuting, driving to a friend’s house, or taking a quick coffee break. Start driving and PikaBoost powers your rear wheel to help you maintain your speed, gradually increasing speed and reducing speed according to your braking pattern to give you an all-electric driving experience. Eco mode strikes the right balance between power assist and power saving. Perfect for people who love to cycle but lack the stamina or physical strength to take long trips over rough terrain. In Eco mode, PikaBoost detects when you’re tired or when you’re going uphill, helping you take the pressure off your joints and body. When traveling downhill, PikaBoost turns off the engine and uses your downhill acceleration to recharge its batteries. The third Exercise mode is unlike the previous two. Cruise and Eco modes help your ride, while Exercise mode does the opposite, providing some resistance to make driving more challenging for more advanced riders. In training mode, the PikaBoost device basically transforms into a dynamo, converting your pedaling power and kinetic energy into electrical energy to store in its batteries, increasing your overall range.

E-brake – E-brake allows PikaBoost to cut power to the motor as soon as the brake levers are actuated.

Drop Detection – When the bike’s tilt angle is detected to be greater than 45 degrees, PikaBoost will immediately stop the motor output.

Slip Detection – PikaBoost shuts down the engine and automatically switches to the regenerative system when the bike tire loses traction on the road, causing the bike to slip.

Auto Sensing Backlight – The light will automatically turn on by sensing the brake line of the bike to keep you safe while riding.

Wireless Bluetooth Lock – The Bluetooth signal on your phone is automatically locked when away from PikaBoost to protect against theft.

Regenerative System – PikaBoost can convert kinetic energy into electricity and therefore acts as a power generator.

Various modes make driving easier or more challenging, while PikaBoost is equipped with a host of features that make driving safer. The device comes with a built-in accelerometer that can detect falls and automatically stops the engine when you incline more than 45° to prevent further injury. If you’re driving on slippery terrain, PikaBoost’s slip detection will activate, stopping the engine and switching to regenerative mode to increase friction between the wheel and the ground to reduce speed and reduce the risk of skidding. Each PikaBoost also comes with a brake sensor that attaches to your bike’s handlebars. This E-Brake allows you to communicate directly with the PikaBoost device and allows the device to brake each time you apply the brakes of your bike. E-Brake works exceptionally well even when the main brake lines on your bike fail, greatly increasing your safety and preventing accidents. Plus, your PikaBoost is built to be IP66 sand, dust and water resistant, which means you can ride on any terrain, even in the rain, and enjoy the experience without worry.

All these features fit into a device that is just over 13 inches long and weighs 3 kilograms. Inside the PikaBoost is a powerful 250W motor that runs incredibly quiet, powered by a 234Wh battery (consisting of 18 replaceable battery cells) that gives PikaBoost output speeds as high as 21mph (30kmh) and a range of 18 miles (30 kilometers). depending on the mod you use. PikaBoost also comes with a built-in taillight that can be customized to flash or shine to keep you visible day or night, and a USB-C input port that lets you charge your devices using PikaBoost’s battery power. PikaBoost also comes with a smartphone app that allows you to monitor its stats, set your location so the device complies with local transportation law requirements, and even lock or unlock your PikaBoost from your phone using Bluetooth. Alternatively, you can detach the PikaBoost from your bike and carry it with you to prevent it from being stolen!

Perhaps the cherry on the cake is the fact that the entire PikaBoost kit currently costs as little as $299 on Kickstarter, with backers accepting their commitment. For this price alone, you get the PikaBoost device with an E-Brake sensor, a USB-C cable, a battery compartment, a set of 18650-type battery cells (18), and a quick start guide. You can add additional accessories to your contribution, such as an extra battery pack to increase your range, a mudguard for your PikaBoost or even a universal holder for your smartphone!

Click Here to Buy Now: $309 $599 ($290 off). Hurry, less than 72 hours left! It went over $1,160,000.

Leave a Reply

Your email address will not be published. Required fields are marked *